Adjustable Rolla-V Range

  • Adjustable models which are ideal for heavy plate or large radius work.

  • Standard lengths 500mm and 250mm.
  • These tools are usually used for bending thicker materials or making large radius components.
  • Specific material specifications vary greatly so it is not feasible to provide detailed data.

eg. minimum flange sizes are greatly affected by squareness of component edge eg. flaring or hole distortion is much reduced with these tools, but is influenced by specific material type eg. radius work is greatly affected by springback of specific material and flange sizes

Adjustable Rolla-V Range

Adjustable Range With Concave Inserts For “U” Radius Bending

Radius Bending
Tool in Action

Adjustable Range With “V” Inserts For Channel Bending

Channel Bending
Tool in Action

RVHD2

500mm 33.6kg
250mm 16.8kg
Maximum recommended thickness 5mm
Available with any base or tang fitting to fit your machine

RVHD2.5

500mm 67.5kg
250mm 33.8kg
Maximum recommended thickness 10mm
Available with any base or tang fitting to fit your machine
Machine Application Guide
RVHD2.5
RVHD3

RVHD3

500mm 98.0kg
250mm 49.0kg
Maximum recommended thickness 20mm
Available with any base or tang fitting to fit your machine
Tool in Action

RVHD4

500mm 200kg
250mm 100kg
Maximum recommended thickness 10mm
Available with any base or tang fitting to fit your machine
Tool in Action
RVHD4

U Radius Bending & V Inserts

Values detailed below cannot be maintained at all times simultaneously. This table is for a guideline only and real world testing is advised. Please always get further clarification from Rolla-V to receive exact data.

Model Maximum Load (T/m) Minimum equivalent Vee – Flat Insert (mm) Maximum equivalent Vee – Flat insert (mm) MAX Material Thickness (mm) – Flat Insert Minimum Outside Radius – Concave Insert (mm) Maximum Outside Radius – Concave Insert (mm) MAX Material Thickness (mm) – Concave Insert V Insert equivalent vee (mm) Minimum Channel Width – V Insert (mm) Maximum Channel Width – V Insert (mm) Min/Max External Corner Radius – V insert MAX Material Thickness (mm) – V Insert
RVHD2 200 14 28 5 8 12 2 10 18.5 31.75 2.5mm-4mm 1.5
RVHD2.5 250 25 65 10 15 27 4 18 35 72 4mm-9mm 2
RVHD3 350 30 110 16 20 40 8 25 45 120 5mm-12.5mm 3
RVHD4 350 60 210 26 40 65 12 40 72.5 220 5mm-20mm 5

Ask about our onsite demonstrations

Would you like to see how our range of tools can help your business? We bring the tools to you, just get in touch
to request an on-site demonstration.

Call Technical Support
Send us an email